Description du produit
Ce produit contient du contenu généré par IA.
A single plum blossom on the tip of a pen.
AI-Assisted: this item was made using AI as a tool (see "About AI use" below).
中文说明在下方 ↓
Plum Nib — fountain-pen nib motif earrings for VRChat avatars (3D data).
Two-tone (gold barrel, steel-colored tip) with gold arabesque engraving and a small plum blossom charm (round five-petal flower). The nib and the charm sway with your head; the engraving glows a pale gold.
■ At a glance
- Left/right pair (arabesque engraving and plum blossom charm), shaped like a fountain-pen nib (center slit and round hole)
- Sways (PhysBone; nib and charm) / glows / 5 glow modes from the Expression menu "ピアスの光" (Earring Glow; the menu labels are in Japanese only)
- Modular Avatar ready (head attachment and menu are added automatically)
- Workshop engraving on the back of the nib (does not glow)
- PC only (Quest / Android not supported)
- AI-Assisted (made using AI as a tool)
■ Glow modes
Glowing parts: the gold arabesque engraving and the plum charm (the charm glows subtly). Off / Slow blink (default) / Candle flicker / Sweep down / Sweep up. The selected mode is synced and saved.
■ What has been verified (v1.0.0)
Verified in the Unity Editor (one in-house avatar "Kaen"): Modular Avatar build without errors; the "ピアスの光" menu (5 glow modes) and parameters are added. Also verified inside PC VRChat (Private upload) on the same avatar: the glow, swaying (including the plum charm), left/right orientation, no flickering in mirrors, and wearing it together with Moon Nib.
Unverified: fitting on other avatars / sync as seen by other players / how the back engraving looks in VRChat / versions other than those listed below.
■ Wearing with Moon Nib
Moon Nib and Plum Nib can be worn on the same avatar (verified on one avatar inside VRChat). When both are worn, two "ピアスの光" (Earring Glow) menus appear; either one controls the glow of both pairs (they share the same setting).
■ Position adjustment required
Ear positions differ between avatars. After attaching, move "Pierce_Root" (left and right) inside the prefab to fit the earlobes; moving the mesh itself does not change the look. The default position may be off (the images were taken after adjusting). See the included guide "導入手順_ReadMe.txt" (Japanese / English).
■ Engraving on the back
The back of the nib (ear side) carries the workshop's engraving (a moon-and-flower crest), about 5 mm. It does not glow and is hardly visible when worn. How it looks inside VRChat is unverified.
■ Requirements (versions used for testing)
Unity 2022.3 (2022.3.22f1) / VRChat SDK - Avatars 3.10.5 / Modular Avatar 1.18.7 / lilToon 2.3.4 / PC VRChat only (Quest / Android not supported).
Not included: VRChat SDK, Modular Avatar, lilToon (install them with VRChat Creator Companion / VCC).
■ What you get
TaishoPenPierce_Plum_v1.0.0.zip
- unitypackage (left/right pair prefab, model, materials, textures, animations)
- 導入手順_ReadMe.txt (setup guide, Japanese / English)
- 利用規約_Terms.txt (terms of use, Japanese / English)
This is 3D data; nothing is shipped. The avatar in the images is not included.
■ Setup
1. Import the unitypackage into a VCC project that has Modular Avatar and lilToon
2. Drag the prefab "Pierce8_Pair_Engraved" directly under your avatar (do not double-click it: that opens Prefab Mode; do not build from there)
3. Move "Pierce_Root" to fit the ears
4. Upload as usual
■ Performance (added per pair; VRChat SDK performance stats, PC)
Triangles +8,984 / Skinned Mesh +2 / Material slots +2 / PhysBone +4 (transforms +8) / Colliders +3 / Texture memory approx. +7.2 MB (approx. +5.9 MB without the engraving + 1.33 MB for the engraving) / Expression parameters +8 bits
■ Notes
- This is 3D data for VRChat, not a physical accessory.
- Images and videos were captured in the Unity Editor. Inside VRChat, the look changes with each world's lighting. The bloom and light trails in the videos are editing effects.
- The fountain-pen nib drawing in the images is a simple illustration, not any specific product or brand.
- The text in the images is in Japanese / English.
■ About AI use (AI-Assisted)
This item was made using AI as a tool; it is not hand-crafted piece by piece.
- Design concept: chosen by the creator from images made with a locally run image-generation AI.
- 3D model and textures: built in Blender with scripts written by an AI assistant (Claude).
- Unity setup and the promotional images / videos: done by the AI assistant (Claude).
- The creator reviewed the results of each step.
- The avatar shown in the images (not included) was also made with AI assistance.
■ Terms of Use (summary)
Allowed: use in VRChat etc., modification, Public avatar upload (as long as the data cannot be extracted), personal commercial use, monetized videos / streams, adult (R-18) content (within each service's rules and the law).
Contact us first: commercial use by companies.
Not allowed: redistribution / transfer / resale, distributing or selling modified data, bundling into avatars or products for sale, use as AI training data, offensive use.
Refunds: due to the nature of digital products, returns and refunds are not accepted after purchase. For problems such as damaged data, please contact us.
Full terms: "利用規約_Terms.txt" in the zip (Japanese / English; the Japanese version prevails).
■ Changelog
v1.0.0: First release
■ Contact
Please contact us through Jinxxy.
Taisho Roman Atelier (大正ロマン工房)
――――――――――――――――――――
笔尖上,一朵梅花。
AI 辅助制作(AI-Assisted):本商品以 AI 为工具制作(详见下方「关于 AI 的使用」)。
※ 本中文说明由 AI 辅助翻译,仅供参考。如与英文说明有出入,以英文说明为准。附带的安装说明和使用条款为日文 / 英文(无中文版)。
Plum Nib —— 适用于 VRChat Avatar 的钢笔笔尖造型耳饰(3D 数据)。
金色笔身与钢色笔尖的双色设计,饰有金色唐草雕纹,侧边垂着一枚小小的梅花吊饰(圆润的五瓣花)。笔尖和梅花吊饰随头部动作摇摆,唐草雕纹泛起淡淡的金光。
■ 要点
- 左右一对(唐草雕纹和梅花吊饰),钢笔笔尖的造型(中间有笔尖缝和圆孔)
- 摇摆(PhysBone;笔尖和梅花吊饰) / 发光 / 5 种发光模式,可在 Expression 菜单「ピアスの光」(耳饰发光。菜单文字仅为日文)中切换
- 支持 Modular Avatar(自动挂到头部并添加菜单)
- 笔尖背面(耳侧)刻有工坊的刻印(不发光)
- 仅限 PC(不支持 Quest / Android)
- AI 辅助制作(以 AI 为工具制作)
■ 发光模式
发光部分:金色唐草雕纹和梅花吊饰(吊饰的光较柔和)。关闭 / 缓慢明灭(默认)/ 烛光摇曳 / 自上而下的流光 / 自下而上的流光。所选模式会同步并保存。
■ 已确认的范围(v1.0.0)
已在 Unity 编辑器中(1 个自制 Avatar「華艶」)确认:Modular Avatar 构建无错误;会添加「ピアスの光」菜单(5 种发光模式)和参数。另外,也在同一 Avatar 上于 PC 版 VRChat 中(Private 上传)确认:发光效果、摇摆(包括梅花吊饰)、左右朝向、在镜子中不闪烁,以及与 Moon Nib 同时佩戴。
未确认:佩戴在其他 Avatar 上 / 其他玩家看到的同步效果 / 背面刻印在 VRChat 中的外观 / 下列以外的版本。
■ 与 Moon Nib 同时佩戴
Moon Nib 与 Plum Nib 可以同时佩戴在同一个 Avatar 上(已在 1 个 Avatar 上于 VRChat 中确认)。同时佩戴时,会出现 2 个「ピアスの光」(耳饰发光)菜单;任意一个都能同时控制两对耳饰的发光(共用同一设置)。
■ 需要调整位置
不同 Avatar 的耳朵位置不同。佩戴后,请移动预制体中的「Pierce_Root」(左右各一个),对准耳垂;移动网格本身不会改变外观。保持初始位置可能会偏离耳垂(介绍图片是调整位置后拍摄的)。步骤见附带的「導入手順_ReadMe.txt」(日文 / 英文)。
■ 背面刻印
笔尖背面(耳侧)刻有「大正ロマン工房」的刻印(月与花的纹章),实际尺寸约 5 mm。不发光,佩戴时朝向颈部,几乎看不到。在 VRChat 中的外观未确认。
■ 运行环境(测试所用版本)
Unity 2022.3(2022.3.22f1)/ VRChat SDK - Avatars 3.10.5 / Modular Avatar 1.18.7 / lilToon 2.3.4 / 仅限 PC 版 VRChat(不支持 Quest / Android)。
不包含:VRChat SDK、Modular Avatar、lilToon(请通过 VRChat Creator Companion / VCC 安装)。
■ 内容
TaishoPenPierce_Plum_v1.0.0.zip
- unitypackage(左右一对的预制体、模型、材质、纹理、动画)
- 導入手順_ReadMe.txt(安装说明,日文 / 英文)
- 利用規約_Terms.txt(使用条款,日文 / 英文)
本商品为 3D 数据,不发实物。不包含图片中的 Avatar。
■ 安装步骤
1. 将 unitypackage 导入已通过 VCC 安装 Modular Avatar 和 lilToon 的项目
2. 把预制体「Pierce8_Pair_Engraved」拖到 Avatar 的正下方(请勿双击:双击会进入 Prefab Mode,请勿在其中构建)
3. 移动「Pierce_Root」,对准耳朵
4. 照常上传
■ 性能开销(每对的增量;VRChat SDK 性能统计,PC)
三角面 +8,984 / Skinned Mesh +2 / 材质槽 +2 / PhysBone +4(骨骼 +8)/ 碰撞体 +3 / 纹理内存 约 +7.2 MB(无刻印时约 +5.9 MB + 刻印 1.33 MB)/ Expression 参数 +8 位
■ 注意事项
- 本商品是 VRChat 用的 3D 数据,不是实物饰品。
- 图片和视频均在 Unity 编辑器中拍摄。在 VRChat 中,外观会随世界(World)的光照而变化。视频中的光晕、光尾是后期效果。
- 图片中的「钢笔笔尖」示意图是为说明而绘制的简图,并非任何特定产品或品牌。
- 图片中的文字为日文 / 英文。
■ 关于 AI 的使用(AI 辅助制作 / AI-Assisted)
本商品以 AI 为工具制作,并非逐件手工制作。
- 设计原案:制作者从本地运行的图像生成 AI 生成的方案中挑选。
- 3D 模型和纹理:在 Blender 中,通过 AI 助手(Claude)编写的脚本制作。
- Unity 设置以及宣传图片 / 视频:由 AI 助手(Claude)负责。
- 制作者检查了每个环节的结果。
- 图片中出现的 Avatar(不包含在商品中)也是在 AI 辅助下制作的。
■ 使用条款(摘要)
允许:在 VRChat 等平台使用、修改、以 Public 形式上传 Avatar(不得以可提取数据的形式分发)、个人商业使用、带收益的视频 / 直播、R-18 内容(在各服务的规则和法律范围内)。
需事先联系:法人(公司/团体)的商业使用。
禁止:二次分发/转让/转售、分发或出售修改后的数据、捆绑进出售的 Avatar 或商品、用作 AI 训练数据、违反公序良俗的用途。
退款:由于数字商品的性质,购买后不接受退货/退款。如遇数据损坏等问题,请与我们联系。
完整条款:zip 内的「利用規約_Terms.txt」(日文 / 英文,以日文版为准)。
■ 更新记录
v1.0.0:首次发布
■ 联系方式
请通过 Jinxxy 与我们联系。
大正ロマン工房(Taisho Roman Atelier)