Arrière-plan de bannière
AFK Coffin - Closes Automatically When You Go AFK, Away Timer | VRChat
AFK Coffin - Closes Automatically When You Go AFK, Away Timer | VRChat
AFK Coffin - Closes Automatically When You Go AFK, Away Timer | VRChat
AFK Coffin - Closes Automatically When You Go AFK, Away Timer | VRChat
AFK Coffin - Closes Automatically When You Go AFK, Away Timer | VRChat
AFK Coffin - Closes Automatically When You Go AFK, Away Timer | VRChat

AFK Coffin - Closes Automatically When You Go AFK, Away Timer | VRChat

Description du produit

A gothic coffin you stand in. When you go AFK, the lid starts to move slowly and shuts with a clack; when you come back, it opens.

While it is closed, the little window in the lid shows a sign such as "Sleeping" and how long you have been away, glowing softly like candlelight.

You stand inside, so there is no pose change and it works with any avatar. If AFK does not trigger for you, close it by hand with Get In.

Features

  • Closes automatically on AFK (VRChat's AFK state): it starts slowly, speeds up, and stops with a clack and a small bounce (about 1.5 seconds). It opens when you come back
  • Away timer in the little window: minutes for the first hour, then hours and minutes, and "3h+" after three hours (for example 12m, 1h 05m)
  • 4 signs for the first line: Sleeping, AFK, Be Right Back, Do Not Disturb
  • Get In by hand: if AFK does not trigger for you (for example, you keep the headset on), close it and step out from the menu
  • Glowing cross inlay on the lid (a gothic cross with a ring at the center). In AudioLink worlds, the light spreads out from the center of the cross with the sound
  • Creak and clack sounds when it closes and opens (quiet, up to 4 m)
  • Details: raised panels with brass beading, worn corners, studs, three hinges (five knuckles each, aligned with the coffin's slant), a ring pull, carved sides with four vertical handles, a cross ornament on top, seamless crown and plinth, button-tufted velvet with a ruffle, a piped pillow
  • The little window goes all the way through the lid: with the lid open, you can see it from the inside as dark glass
  • 2 colors: ebony x brass (crimson velvet) / white x silver (midnight indigo velvet). Both included
  • Height dial (0.8-1.25x) to fit tall avatars or hats
  • Lightweight: about 6,900 triangles, 5 materials, 0 particles, 0 PhysBones
  • Modular Avatar ready: just put it under your avatar (it is not attached to a bone and stands at your feet)

Menu (English menu prefab)

  • AFK Coffin > Show: coffin on/off
  • AFK Coffin > Auto Close: when ON, the coffin closes automatically when you go AFK (ON at first)
  • AFK Coffin > Cross Light: glowing cross on/off (ON at first)
  • AFK Coffin > Sign Text: the first line in the little window (Sleeping / AFK / Be Right Back / Do Not Disturb)
  • AFK Coffin > Get In: close it by hand (press again to open it and step out)
  • AFK Coffin > Height: coffin size, 0.8-1.25x (1.0x at first)

What's included

  • Prefabs x 2 colors
  • FBX, textures, lilToon materials, window and cross shaders, sound effects, animations
  • English-menu prefabs (_EN) next to the Japanese-menu prefabs. Use one or the other on an avatar, not both.
  • Instruction manual and Terms of Use in English and Japanese

Specs

  • Triangles: 6,894 (both colors; body 2,602, lid 1,982, lining 2,231, cross 66, window 13)
  • Material slots: 5 (body and lid, velvet, window, back of the window, cross)
  • Synced parameters: 21 bits (Show, Auto Close, Cross Light, Sign Text, AFK, Get In, Height)
  • 0 particles, 0 PhysBones, 1 Audio Source
  • VRChat performance rank (PC, test): Good (Audio Source: Excellent)
  • Size: 1.95 m tall (to the top ornament), 0.82 m wide (to the handles), 0.52 m deep (at scale 1.0)

Requirements

  • Unity 2022.3.22f1 (an avatar project made with VRChat Creator Companion)
  • VRChat SDK (Avatars) 3.10 or later
  • Modular Avatar 1.18 or later
  • lilToon 2.3 or later

Please note

  • PC only. Not supported on Quest / Android.
  • The time in the window is counted on each viewer's device, from when they saw the lid close. People who arrive later see it start from 0 minutes (no network sync is used for it).
  • If your avatar has an AFK motion that lies down or sits, the body sticks out of the coffin. Turn that motion off, or turn "Auto Close" OFF and use "Get In".
  • The coffin stands on the floor at your feet and is not attached to a bone. It moves with you when you walk. To attach it to the hips, add a Modular Avatar Bone Proxy (Hips) to "..._Model".
  • If a viewer's Safety settings hide shaders, the window text and the glowing cross are not shown.
  • The sound effects are quiet (up to 4 m). To silence them, set the volume of Audio to 0.

Terms of use

  • You may upload it to VRChat and similar services on your own avatars, edit it, and use it in streams, videos and photos (commercial or not).
  • You may not redistribute, resell or share the data (edited or not), or use it to train AI.
  • Full text: Terms_of_Use.txt in the download.

Also on BOOTH

This item is also sold on BOOTH, the Japanese marketplace: https://karakuri-komono.booth.pm/items/8940966

How this was made (AI-Assisted)

The 3D shapes, materials, shaders and texts of this item were made with scripts written with AI assistance. A person checked how it looks and moves in Unity before release.

$4,00 USD